Welcome to logikeditor.de
With the LOGIKEDITOR, we offer you user-friendly, web-based software that is already available in the EIBPORT and LOGIKMODULE is integrated. Create circuits and sequences easily and intuitively to make your building automation more efficient and flexible.
On this platform, you have access to a wide selection of ready-made logic groups for different automation areas, provided by both BAB TECHNOLOGIE and the community. In this way, you can tailor your building automation even better to your needs.

Heating and cooling control with mixer and pump

The module is intended for flow temperature control with a pump and mixer. Preferably for floor and wall heating or cooling. The module is connected to the heating system via the summer/winter...
Niclas Esterl
EP, LOM
441
 6

Solar surplus for hot water boiler (dim)

With this logic group, the solar surplus is used for hot water preparation. About the function. A percentage value for the dimmer control of the heating rod is calculated from the "current supply/supply" input....
O. Stöhr
EP, LOM
432
 4

Solar surplus for water heater *

With this logic group, the solar surplus of a PV system can be used with the help of a heating cartridge in the hot water boiler (built-in heating cartridge with 3 identical heating rods), e.g. to heat gas or oil....
Klaus Hofmann
EP
628
 0

Pulse width modulation Control function

This logic group implements a pulse width modulation control function, which can be used for a heating system, for example. The control function can be activated and deactivated. The control parameters can be set via separate inputs to the pulse width...
Dominik Siegl
EP, LOM
402
 1

Fashion heating

In this logic group, a 1-byte telegram value is converted into a 1-bit telegram and sent via one of four outputs depending on the telegram value. This logic group is used, for example, for the...
Avatar photo
BAB TECHNOLOGIE
EP, LOM
827
 0

Ventilation system *

The logic group controls a Novus Paul F300 ventilation system as needed via an analogue KNX 0-10V output (4-fold). The functions of this logic group can be used, among other things, to open windows, heat in...
Jochen Mälzer
EP
406
 0

Helios Easy Controls

This logic group enables the control and retrieval of information from the Helios ventilation systems with the "Easy Controls" function. The Helios KNX module is not required for this! TODO: In...
Markus Hopf
EP, LOM
785
 4

Heating/air conditioning switchover countdown (2/2)

The logic group indicates when the switchover between heating and cooling will take place. The reason for this is that a time delay is necessary due to the 2-pipe system used. In order to avoid...
Markus Dworak
EP, LOM
299
 0

Trigger heating/air conditioning changeover (1/2)

In order to automatically control the switching between heating and air conditioning, these logic groups determine the number of RTRs that are set to heating or cooling and send the corresponding...
Markus Dworak
EP, LOM
309
 0

Control heating via presence detector

This logic group controls the heating for a room as required. In the first step, a presence detector checks whether a person is in the room for more than 20 seconds.
Markus Waldhauser
EP, LOM
317
 0

Heating curve and mixer control

This logic group provides the optimum flow temperature for underfloor heating based on the measured outdoor temperature. A Nord outdoor temperature sensor is best suited for the measurement. For the logic group, the...
Michael Wolfram
EP, LOM
1,876
 1

Heating via weekly clock with standby

This logic group makes it possible to set different operating modes via a weekly timer with self-assigned names for the operating modes and to set the operating mode to "Standby" as soon as the weekly timer...
Christian Geier
EP, LOM
469
 0

Operating modes for heating via weekly timer

This logic group makes it possible to select different operating modes with the help of a week clock, but instead of a telegram value, via a name. This allows the user to select the operating modes in the visualisation easily and...
Christian Geier
EP, LOM
478
 5

Weekly clock heating with standby

The week clock in this logic group controls the heating via the "Operating mode" output. In addition, the "Operating mode" output is set to standby if the release for the week clock is withdrawn....
Avatar photo
BAB TECHNOLOGIE
EP, LOM
726
 1

Weekly clock heating

The week clock in this logic group controls the heating via the "Operating mode" output. A 1-byte data point type is used for the output of the week clock. In this way, three operating modes can be controlled via a...
Avatar photo
BAB TECHNOLOGIE
EP, LOM
852
 0
Filters
Close">
Reset