This logic group is an extension of the example group "Day-night switching (simple)".
A second output was added to the logic group and three different lighting scenes for three daytime periods were added.

The function of this logic group is that the lighting in a room switches on with one of three lighting scenes, depending on the time of day ("day", "evening" and "night"). Which of the two outputs is used depends on the lighting scene.

The preset times for the day sections and thus also for the lighting scenes are:
- "Day" from 7 a.m. to 8 p.m.
- "Evening" from 8 to 10 p.m. and
- "Night" from 10 p.m. to 7 a.m.

The lighting scenes are set via the weekly clock. In this way, only one of the three door elements is activated at a time.
In this way, the switching telegram, e.g. from a presence detector, is routed through the currently activated door element.
The subsequent "binary filters" and "inverters" ensure that only one of the two outputs is ever used. The "translator" tools are responsible for the dimming values.

The lighting scenes are configured as follows, e.g. for a corridor with direct (switch only) and indirect lighting (dimmable):
- For the day segment "Day", only the ceiling lamp is switched on and off.
- In the daytime section "Evening", on the other hand, only the indirect light is dimmed to 75%. Switching off sets the dimming value to 0%.
- And in the daytime section "Night", only the indirect lighting is also dimmed to 45% when switched on and switched off with 0%.

Small hint: At the time when the day section changes, the lighting mood is also changed. Except when the lighting is switched off.